Verandah Rafters for 1800mm Verandah Widths – MGP12 Pine

$92.00$234.00 incl. GST

All Verandah Rafter Types and Sizes for 1800mm Wide Verandahs

Shop our range of structural and beautiful curved verandah rafters by selecting from the options below.

All of the verandah rafters available in this listing are suitable for construction of 1800mm wide verandahs.

  • Made from LOSP(H3) treated MGP12 radiata pine – read LOSP Treatment Facts
  • Available for all verandah roof types – Bullnose, Concave, Convex, Ogee and Half Bullnose
  • Available in all bullnose rafter radii – 300R, 350R, 400R and 450R (Learn more about bullnose rafter radius)
  • Select from Common, 45° Hip/Valley or 22.5° Hip/Valley rafters at 90mm or 140mm x 45mm
  • Actual rafter length is greater than the verandah width to allow for a standard 5° roof pitch
  • Finger-jointed for maximum strength and 100% Australian-made by hand using traditional manufacturing techniques
  • Designed and tested to meet and exceed requirements for SAA codes – AS1170 Part 1: SAA Loading Code; AS1720: Timber Structures Code and AS4055: 1992 Wind Loads for Housing

Note: This listing is for individual verandah rafters – to order a Bullnose Verandah Kit that comes with everything you need to build a verandah – down to the nuts and bolts! – please complete our Request a Quote for a Bullnose Verandah Kit form

Not sure what you need? Contact Us for expert advice about how to bring your project to life.

Clear

Description

Learn More About Verandah Construction and Order Requirements

For more information about verandahs, including a guide to verandah components, rafter radius explained and more, we recommend you read Bullnose Verandah Essentials – Definitions and Key Components

Thinking of ordering a Bullnose Verandah Kit? Read our useful and informative Order Guide – Bullnose Verandah Kits to learn the best way to measure your verandah area, what you need to have ready before you order and much more.

The Lyrebird Verandah Rafter Range

Lyrebird Enterprises were the first to manufacture bullnose, concave and convex verandah rafters to building code in Australia.

We manufacture rafters for all verandah roof types – bullnose, concave, convex, ogee and half bullnose. Our standard rafter range caters to verandah widths between 1200mm and 3000mm. For verandah widths over 3000mm, we invite you to Request a Quote.

Our Bullnose Verandah Kits includes everything you need to build a verandah – including rafters, posts, purlins, roofing iron, etc. We’ll also provide you with rafter layout drawings, that show how many rafters you need and how they should be spaced along the length of the verandah. We can discuss your verandah construction with you or your builder, to make sure your build runs smoothly.

If you want to workshop your ideas or have detailed questions, we invite you to Contact Us for a discussion – we have a wealth of practical expertise that we can share with you!

Why Build a Bullnose Verandah?

  • Reduces your electricity bills – for good – once installed, your bullnose verandah won’t cost you an arm and a leg every month like your air conditioner might
  • Bullnose verandahs provide very effective insulation – rooms behind a bullnose verandah remain surprisingly cool – even on notoriously hot Australian summer days
  • Add real dollar value to your home – adding a classic Australian bullnose verandah will add real dollar value to your home and give you a pleasant outdoor living area
  • Bullnose verandahs are beautiful – architecturally, the bullnose verandah is a lovely feature that enhances the aesthetics of your home

Additional information

Weight 7 kg
Dimensions 2000 × 45 × 90 mm
Verandah Type

Bullnose – 300R, Bullnose – 350R, Bullnose – 400R, Bullnose – 450R, Concave, Convex, Half Bullnose, Ogee

Rafter Type

22.5° Hip/Valley, 45° Hip/Valley, Common

Rafter Size

140 x 45mm, 90 x 45mm

Reviews

There are no reviews yet.

Be the first to review “Verandah Rafters for 1800mm Verandah Widths – MGP12 Pine”

Your email address will not be published. Required fields are marked *